R-Code 1969 Ford Mustang Mach 1 Super Cobra Jet







Ended Jul 25, 2025 at 7:10 PM UTC
Addenda and errata
*Please note a photo of the dash board VIN has been added to the photo gallery.
Video gallery


Description
Introduced as a performance-oriented upgrade to the Mach 1 fastback, the 1969 Ford Mustang Mach 1 Super Cobra Jet was designed for serious drag racers and horsepower enthusiasts. At the heart of the SCJ was the 428 cubic-inch Super Cobra Jet V8, officially rated at 335 hp, although real output was closer to 400.
What set the SCJ apart from the standard Cobra Jet was the inclusion of the Drag Pack option, which added a 3.91 or 4.30 rear axle ratio, engine oil cooler, and stronger internals like beefier pistons and a nodular iron crankshaft. These enhancements made the SCJ a dominant force on the street and strip.
The 1969 Mach 1 featured aggressive styling cues, including a shaker hood scoop, matte black hood treatment, hood pins, and Mach 1 badging. Inside, it came with high-back bucket seats, woodgrain trim, and a rally-style instrument cluster, blending performance with comfort. Only a limited number of Mach 1s were equipped with the SCJ and Drag Pack, making them highly collectible today. These cars were capable of quarter-mile times in the low 13-second range, a testament to their raw power and engineering.
Highlights
Refinished in Meadowlark Yellow paint with blackout hood treatment (originally finished in Acapulco Blue)
Black Clarion knit vinyl/Corinthian vinyl upholstery
Original Mach 1 Hi-Back bucket seats
Powered by a 428 cu-in V8 advertised at 335 hp and 440 lb-ft of torque (hp was underrated; actual output was likely closer to 400+)
Four-speed manual transmission with Hurst shifter
The chassis number (9T02R162573) decodes as:
9 – 1969 model year
T – Metuchen, New Jersey, assembly plant
02 – Fastback
R – 428 cu-in V8 4BBL Ram Air Induction CJ
162573 – Sequential production number
Maintenance in 2024-25 (starting with the most recent) included:
Replaced gauge cluster film (March 2025)
Replaced speedometer cable and gear (February 2025)
Rebuilt original Holly Four Barrel carburetor (January 2025)
Complete tune-up (May 2024)
New clutch kit/resurfaced flywheel (March 2024)
Features
Dual exhaust with Flo-Pro mufflers
Upgraded wood-rimmed steering wheel
Upgraded center console
Pioneer Super Tuner III AM/FM/CD stereo with Cerwin-Vega speakers and G2250 Cerwin-Vega amp
120 mph speedometer and 8,000 rpm tachometer
BFGoodrich Radial T/A tires: 245/60R15 front, P275/60R15 rear
Known Imperfections
Paint imperfections up front and on hood
Paint has worn edges of shaker hood scoop
Paint chipped with minor rust showing through on driver’s front fender, just behind the bumper
Passenger front wheel shows wear
Paint is cracking/flaking on front edge of passenger door sill
Minor tear in vinyl on outside edge of driver’s seat
Vinyl panel on back of passenger seat is loose (spare clips included)
Original headliner loose in rear on passenger side
Minor blemishes in original carpet
Front tire rubs the fender well when making a right turn
Recently repaired minor dent in the rear passenger side quarter panel
Recently repaired minor rust bubbles along lower edges of both doors
Scuffs on underside of gas tank
Minor rust on body under trunk lid
AC is said to be inoperable
Included
Carpeted Mustang floor mats
Car cover
Keys
Original steering wheel
Original center console
Spare decals
Ownership History
The Texas seller of this 1969 Ford Mustang Mach 1 Super Cobra Jet has owned it since January 2016.
Additional documents
All auction listings on Hagerty Marketplace are created using information provided by the seller. The Marketplace team and the seller have reviewed all information for accuracy to the best of their abilities. Bidders are ultimately responsible for conducting their own due diligence before placing a bid, including verifying details, condition, registration requirements, and compliance with applicable laws. For any questions or additional information, contact the seller.