Even the most challenging projects don’t tarnish the appeal of Dodge’s W150

Eddy Eckart

The truck’s 360-cubic-inch V-8 fired up right away and settled into a low but stable idle. Dave slid the column shifter into drive, and the ’79 Power Wagon sauntered out of his driveway.

“Glad the rain held off,” I said, cranking down the passenger window.

Dave nodded, smiling a little. “Yeah, it’s perfect today.” It was the kind of back-and-forth that goes with nervous anticipation—we were happy about the blue skies, but both of us wondered about the drive ahead. “I’m still learning to trust her, you know?” he said, patting The Pumpkin’s dashboard.

Turns out we had nothing to be afraid of. The Pumpkin, as we affectionately call my cousin Dave’s bright orange Dodge W150, ran like a champ.

Dodge W150 front three quarter
Eddy Eckart

A couple years back, we replaced the former plow truck’s engine and did a few “while we’re working on it, we might as well” tasks, like bringing some shine back to the paint and replacing the shocks. Dave and his son Jimmy got to enjoy it for a summer, but electrical gremlins—a problem these trucks occasionally run into—crept in, so he brought it back to my barn for diagnosis.

Between the haphazard wiring for the plow that was once attached to it, and the cracks and corrosion on the same-age-as-me harnesses, we decided to dive headfirst into rewiring the whole truck. We wanted it to work, and to not have to worry about it again going forward. Dave’s an electrician, and I’ve taken apart my share of cars, so while rewiring the Dodge would be a new experience for both of us, we figured we could tackle it.

We weren’t wrong, but the job did remind us of the value of patience.

Though some of the truck’s harnesses were available as new, others (the engine harness in particular) were either hard to come by or sold as “good” condition originals. Wary of any old wiring, we elected to go with a universal kit and a new, OEM-style front lighting harness. Functionality, not originality, was our primary focus for the W150, and this combination enabled a whole new system with factory connectors and no splices at the part of the truck that would see the most weather.

Dodge W150 wiring diagram
Details, details. Eddy Eckart

Looking at the universal harness manual and the original harness map side by side felt like the automotive version of deciphering the Rosetta Stone. Each successful connection led to a high-five. The project wasn’t without its confounding moments; on more than one Saturday we just had to stop, take the week to think about whatever wasn’t working, and then hit it hard again the following weekend. We prevailed, though, first getting the engine running, then the exterior lights, then the cabin.

Dodge W150 interior full angle
Eddy Eckart

Of course, we took the time to make more incremental improvements, too. Fresh weatherstripping and chrome sills spruced up the cab’s openings. A Bluetooth-capable radio and upgraded speakers added tunes, and new, cut-pile carpet covered new floor pans on both sides. I sanded the peeling silver dash and wrapped it in a woodgrain vinyl that is much easier on the eyes. What was a well-worn work truck interior now fully looks the part for the W150’s second life as ice-cream getter and Home Depot hauler.

Dave had driven The Pumpkin 45 minutes home from my place with no problems, but this past weekend was the first time I got to enjoy the truck. There’s a good chance the pride in our work colored my assessment, but the Dodge felt confident on the road. There’s no hurry in any of its dynamics, nor should there be. Its fresh dampers made for a comfortable, controlled ride, and the 360/two-barrel combo provided an undercurrent of torque even at part throttle, like the truck has got plenty of old-man strength in reserve.

Now that the Dodge is back home, whenever they have to go somewhere, Dave’s son Jimmy asks if they can take The Pumpkin. The W150 is the perfect practical classic.

Dodge W150 interior shifter
Eddy Eckart

There’s nothing like a big project to give you a deeper appreciation for the platform you’re working on. The Pumpkin got me paying more attention to Mopar products, the trucks in particular. In my neck of the Ohio woods, Square Body Chevys seem to be the dominant older truck, but there are a few third-gen (1972–80) Dodge D/W series like The Pumpkin still driving around. Attrition may be the root of the Dodge’s comparative rarity up north, at least for the full-time 4×4 (“W”) models. Like Dave’s truck, many W150s were put to work plowing snow. Rough, salty winters and a working life can take their toll.

Likely because Dodge knew the many work roles for which these trucks were destined, the company didn’t skimp on engine options for its third-gen D/W trucks. Base vehicles came with a slant-six. Depending on the year you can find iterations of the Chrysler LA V-8 in 318- or 360-cubic-inch displacements, or the 400-cubic-inch B and 440-cubic-inch RB big-block V-8s. Dodge dabbled in diesel in ’78 and ’79 with an anemic, 105-horse, naturally aspirated Mitsubishi engine, but few sold and fewer exist today. Dodge returned to the diesel scene a decade later in the Ram with the now-familiar turbocharged Cummins 5.9-liter straight-six.

Dodge W150 engine
The 360-cubic-inch LA V-8 in the Pumpkin. Eddy Eckart

It wouldn’t be the late ’70s without a themed special edition, and Dodge’s 1978 Li’l Red Express is perhaps the best remembered. Though not the original factory hot-rod pickup—that title goes to Dodge’s Custom Sports Special, available with a 365-hp, 426 Wedge–engined beast from 1964—the Li’l Red Express more than held its own against cars of its era. Its hopped-up 360 sported 225 horsepower, five more than the top-trim engine in the Pontiac Trans Am from the same year. Door decals over bright red paint and vertical exhaust stacks completed the mustache-muscle conversion of Dodge’s venerable pickup. Just under 7500 were made over the 1978–79 model years. Less widely known, at least outside of Mopar truck circles, is the 1976–79 Warlock, a visual package that could be optioned on 4×2 or 4×4 models either a six- or an eight-cylinder engine.

Pricing for third-gen D/W-series pickups has followed the uptick in interest for the segment, but driver-quality examples remain affordable. Among 1979 trucks, the W-model 4x4s in #3 (Good) condition outpace their rear-wheel-drive D-model stablemates, but the two swap places when #4-condition, driver-quality examples are considered. A #2, Excellent-condition W150 will top the $30,000 mark, with a similar-quality ’79 Li’l Red Express fetching a few thousand more.

Based on insurance quotes sought by each generation, the future looks bright for the D/W-series Dodges. Interest from Gen X tracks consistently with that group’s market share, while enthusiasm from millennials and Gen Z outpaces their respective shares of the market.

Few things are as validating as a trouble-free long ride in a vehicle you’ve poured your energy into. The Pumpkin isn’t perfect, but it’s a great entry into the classic truck world.

Dodge W150 rear sliding window
Eddy Eckart

 

***

 

Check out the Hagerty Media homepage so you don’t miss a single story, or better yet, bookmark it. To get our best stories delivered right to your inbox, subscribe to our newsletters.

Via Insider

Click below for more about
Read next Up next: Homegrown: Scaled-down Cobra has both bark and bite

Comments

    I think it should be upgraded to “The Great Pumpkin”. That aside, cool truck and yes, I always liked Dodge trucks. The first Dodge truck I ever drove was a 1966 D600! We also had a 1968 Chevy C60 but I always took the Dodge and let the other guy drive the Chevy!

    Great truck, enjoy!

    With new pickup prices through the roof you don’t want to get a new one to actually use! Better off with a “vintage” truck for occasional use. Just not so vintage that you’re scared to use it as a truck…

    Our shop had two or three of them back then. The body metal was so thin I swear Chrysler took a sardine can and pressed two doors out of it. The body’s rusted out in no time. Work trucks don’t get washed often and they are abused a lot so the body’s get dented, scraped and rusty fast.

    Reminds me of my Dad’s ’78 D100. Slant 6, 4 speed, long bed. That truck hauled more, and went farther than any of his friends Ford or Chevy counterparts…. I learned to drive stick on that truck when I was 12… A few years ago for Christmas, I built him a model of that truck, and you should have seen the tears in his eyes from the fond memories….
    Thank you for posting this story

    I agree with many of the responses, new trucks are insanely expensive with too many electronic components that are prone to failure leaving you high and dry in the middle of nowhere. Co-worker just bought a brand new 2023 GMC 3/4 ton 4×4 diesel. 100000 dollars later and 1500 kms on the dial and he is dead in the water due to some electronic component on the truck that failed. And to add insult to injury he might have to wait up to six months for the part to come in. That is why I went the route of buying a 1981 W150 Club Cab short box that was sitting in a field for the last 18 years. Slowly but surely working on getting it road worthy. Sure it does not have all the bells and whistles of the new trucks, but it is something I can work on without taking a loan from the bank to pay stealership repair costs. What astounded me was within a few hours we had the old 360 engine fired up and running after 18 years. And the best part will be there will be no payments on it. Great story on the pumpkin and I enjoyed reading it, lets save these old trucks from the crushers.

Leave a Reply

Your email address will not be published. Required fields are marked *