Original Owner: A young soldier buys his dream car in a war zone

Ray had the red “hockey stick” stripes added when the car was repainted in 1996. Jim Campisano/Muscle Car Campy

Welcome to Original Owner, a new series showcasing—you guessed it—people who bought a classic car new and still own it. The cars don’t need to be factory-original, just still in the hands of the first owner and still getting driven. —Ed.

In the summer of 1969, Ray Eugenio was 19 and nearing the end of his army service in Vietnam. He was stationed at the 29th Evacuation Hospital on an airbase in Bình Thuy, near the city of Can Tho. Like other GIs, he was focused on getting home, in his case to Brooklyn. His thoughts often turned to cars. He planned to buy a new muscle car for life after Vietnam but didn’t have to wait, as he could order it through the base’s post exchange (PX).

Although he had initially planned to buy a Mustang, Ray ultimately chose a 1970 Plymouth ’Cuda, the performance version of the third-generation Barracuda, introduced for 1970 and known within Chrysler as the E-body.

1970 Plymouth ’Cuda: Factory basics

In typical Mopar fashion, the car came built for speed from the factory. For $3164, just $300 over a base Barracuda, the ’70 ’Cuda delivered a huge performance upgrade. Standard equipment included a 335-hp, 383-cubic-inch big-block V-8 (the standard Barracuda featured a 318), a four-barrel carburetor, dual exhausts with tailpipe tips poking through the rear valance, heavy-duty suspension with front and rear antiroll bars, larger drum brakes, a dual-scoop hood, and front “road lamps.”

For extra cost, the buyer could step up to the optional 440 four-barrel (375 hp), the 440 six-barrel (390 hp), or the mighty 426 Hemi (425 hp). Also on the list as a no-charge option, and featured prominently in the 1970 Barracuda brochure, was the 340-cube, four-barrel small-block that debuted for 1968. While some at the time likely viewed the 340 as a downgrade from the 383, it was anything but.

1970 Plymouth Cuda Ray Eugenio engine bay
The 275-hp 340 was a no-cost option if the buyer did not want the standard 383, and it was the most popular ’Cuda engine for 1970. Jim Campisano

A member of Chrysler’s LA-series family of V-8s, the 340 was built only as a high-performance engine. It featured a forged crankshaft, a double-roller timing chain, a 10.5:1 compression ratio, a hot cam, 2.02-inch intake valves, a dual-breaker distributor, and a Carter AVS 650-cubic-feet-per-minute four-barrel carburetor with a no-snorkel air cleaner. That list helped produce a factory rating of 275 hp. Car Life magazine ran an automatic-transmission 1970 340 ’Cuda like Ray’s car down the quarter-mile in 15 seconds flat at 94 mph.

Of the 55,499 Barracudas produced for 1970, 18,880 were ’Cuda hardtops. About one third of those got the 340 four-barrel, making it the most popular engine. (There were also 2724 AAR ’Cuda hardtops, which used the 340 six-barrel engine exclusively.)

Ray Eugenio’s car

1970 Plymouth Cuda Ray Eugenio hood details
Hood pins and faux hood scoops were muscle car style must-haves in 1970. Jim Campisano

A long option list enticed ’Cuda buyers with 12 exterior colors and a slew of upgrades focused on performance, comfort, and cosmetics. Ray ordered his car in Black Velvet paint. On the performance side, he chose the TorqueFlite automatic over the standard three-speed stick and paired the standard 3.23:1 rear-axle ratio with the optional Sure Grip differential.

Because he intended to daily his ’Cuda, Ray also chose power steering (but not power brakes), air-conditioning, tinted glass, a floor console with Slap Stik shifter, a rear-window defogger, an AM solid-state radio, dual color-keyed racing mirrors, body side moldings, and the lighting package. His out-the-door cash price was $4050.83.

1970 Plymouth Cuda Ray Eugenio flatlands plymouth order sheet
Ray’s well-optioned ’Cuda 340 cost four grand new. Jim Campisano

The Plymouth hasn’t been Ray’s daily in many years, but as he’s retired and living in Florida, he still drives it frequently. The ’Cuda also earned its 15 minutes of fame (12 minutes and 27 seconds, to be precise) by starring in a video on the “Muscle Car Campy” YouTube channel. (MCC is run by Jim Campisano, former editor of the magazines MuscleCars, Super Chevy, and Muscle Mustangs & Fast Fords.

Rays Cuda memories

Hagerty: When did you order the car through the base’s PX?

Ray Eugenio: September 1969, and I was going home that December. There was a catalog, but no cars, obviously. I picked out the car I wanted, the color and options, and the salesperson wrote it up.

Hagerty: How long did you have to wait to take deliver?

RE: They told me it wouldn’t be built until I left Vietnamese airspace. When I got my orders, I brought them to the PX, and the salesman said they’d put the order through on the day I left. That was December 15, 1969. I picked the car up at Flatlands Plymouth in Brooklyn on January 30, 1970. I have the bill of sale from when it was delivered, and I still have the original window sticker and build sheet.

1970 Plymouth Cuda Ray Eugenio vintage print
Mr. Gasket slotted chrome wheels went on in April 1970. The big, ugly bumper guards were a must for street parking in Brooklyn. Courtesy Ray Eugenio

Hagerty: The E-body Barracuda was brand new in fall of ’69. Did you know right away that you wanted one?

RE: My original choice was a Mustang Mach 1. When I got drafted, I had a Thunderbird with the 390. I was familiar with that engine, so I wanted a Mustang with it. They told me the 390 had been discontinued for the Mustang and mentioned the new 351 Cleveland. But I didn’t want an engine I knew nothing about.

I also looked at the Mustang Boss 302, but you couldn’t get air-conditioning with it. So, I looked at other cars—Chevelle SS, Oldsmobile 4-4-2, Buick Gran Sport, and Camaro. Then I saw the Barracuda and thought, That’s what I want.

Hagerty: Have you ever considered selling?

RE: By the late 1980s, the driver’s seat was starting to rip, and there were some [bodywork] dings, so I thought maybe I should get something new. I put a for-sale sign in the window, asking $5000. The phone didn’t stop ringing, so I figured I’d made a mistake and decided to keep it.

1970 Plymouth Cuda Ray Eugenio hood open engine bay
Showing off the 340. Courtesy Ray Eugenio

Hagerty: Have you made any changes or modifications?

RE: I had it repainted in 1996 in the original color. The red “hockey stick” stripes were not available with black paint when the car was new, so I added them. That’s when I had new carpeting put in and reupholstered the front seats.

The rest of the interior is original. I upgraded to Mopar electronic ignition and changed the Carter carburetor to a Holley. The exhaust has different mufflers, and I added Mopar Performance valve covers and of course radial tires.

Hagerty: Tell us about the Rallye wheels.

RE: When the car was delivered, it had black steel wheels with dog-dish hubcaps and whitewall tires. It was supposed to come standard with Rallye wheels and white-letter tires, but I was told those had been made optional after I ordered the car. I freaked. Nobody told me, or I would have ordered them.

They said they could add them for about $250. I said, “I’m not paying that, and I’m not driving this car with whitewall tires. You’ve got to reverse them as blackwalls and balance the wheels.” So they did that.

I drove around with the steel wheels for a few months. Then my girlfriend was driving it, because my job came with a company car. That April, for my birthday, she surprised me by having Mr. Gasket chrome slotted wheels mounted, and they stayed on the car until I had it repainted. I picked up a set of Rallye rims, but with the 1972 center caps, because I liked those better.

1970 Plymouth Cuda Ray Eugenio wheel tire
Ray added the 1972 Rallye wheels in the 1990s. Jim Campisano

Hagerty: How often do you drive it?

RE: Almost every weekend. My daily driver is a 2000 Corvette.

Hagerty: What’s your favorite memory with it?

RE: There are so many! I took the car on my honeymoon in the Poconos in the winter and got stuck in the snow. My two oldest kids came home in it after childbirth. I have a real emotional relationship with this car.

 

__

Car: 1970 Plymouth ’Cuda 340

Owner: Ray Eugenio

Home: Brandon, Florida

Delivery date: January 30, 1970

 

***

 

Are you the original owner of a classic car or do you know someone who is? Send us a photo and a bit of background at editor@hagerty.com—you might get featured in our next installment!

 

Check out the Hagerty Media homepage so you don’t miss a single story, or better yet, bookmark it. To get our best stories delivered right to your inbox, subscribe to our newsletters.

Read next Up next: Racing 101 #6: Why racers are superhuman scientists

Comments

    I did the same, also 1969. Bien Hoa, showed me a loss leaf book with all cars. I bought a 1970 Boss 302 grabber blue. I was winner in Gpure stock and runner up pure stock eliminator 1970 Englishtown NJ.

    What a amazing heartfelt story. I never met my Dad and only saw my mother twice in my life.🧬 I don’t know why I’m a true Mopar car girl. I wondered why I love them so much. I own a ’74 ‘Cuda. But we both got cancer and aren’t the same since. Sharing my love of cars, especially Mopars is my true 💕 love. I love car stories like this one. How the family car is the best of all. Also heartfelt thank you for your service. I hope you have family members that love it as much as you do. My grandson loves my ‘Cuda and promises me he will grow up fast and restore it for me. We have to pass our love of special cars on others. Real cars that are loved by so many.

    Similar but not the same… In June 1971 I bought a dealer demo 5000 mile ’70 Barracuda Gran Coupe… 318 column automatic. Red with white vinyl top and the Rallye wheels and trim rings that Ray Eugenio wanted… however it had 3 ring whitewalls which i really liked. Like Ray, I wanted A/C… PS and automatic trans. My car was high trim. with houndstooth seats and a ceiling console. The mirrors and elastomeric rear bumper were in body color…. front bumper was chrome. no driving lights… and had a different cast aluminum rocker panel trim… longitudinal strakes.

    I drove it for real in Ohio and Michigan for 115k miles… it was really getting rusty… the rear springs were loose to the mounts. The last night i owned it in 1979 it ran up to 115 mph… Loved that car…

    Congrats to Ray for keeping his..

    it was really getting rusty… the rear springs were loose to the mounts. The last night i owned it in 1979 it ran up to 115 mph. Rusty frame and loose springs and you got it up to 115 MPH. Sounds like a recipe for disaster to me LOL

    Great story. I am also the original owner my 73 Datsun 240Z, ordered just before our ship left for a 6 month deployment to Vietnam, and picked it up when I got back. I only drive it for pleasure these days, but still enjoy it.

    Great article. A few very tasteful modifications over the years. The red hockey stick stripe is absolutely cherry. Good work. And as the others stated, thank you for your service…to all of you fellas. 🇺🇸

    Just for clarification…I have questions. By stating “original owner of a classic car”, does that mean it in its purest sense? Is original family included and what years are considered classic(pre-‘73)? Just curious.

    In high school I dated a girl whose brother was in Vietnam. She was the caretaker of his ‘67 Impala convertible…a nice bonus for me! As he neared the end of his hitch he sent the family his exact specs for a new ‘71 Malibu convertible and had them place the order for it. The girl and I broke up before the brother or the Malibu showed up. Luckily, I found a girl in college with a ‘72 Malibu SS!

    Wonderful story. Thank you for your service. May you and your family continue to enjoy it.

    As a long time Mr. Gasket sales rep for California territory, there were no “Mr. Gasket” wheels. We eventually owned Cragar, Weld, and True Spoke only.

    Jim, Great story about Ray’s ‘Cuda. My original owner story is similar, but involves my ’70 Datsun 240Z, which is my daily driver. On my way out of Vietnam in Jan. ’70. and passing through Long Binh, where there was a PX and news stand, I saw a Sports Car Graphic with an article about Datsun’s new sports touring car. That was it for me. When I got home on my 30-day leave, I went to visit my folks in Chattanooga. Straight to the local Datsun dealer. They didn’t have any yet, and said there were deposits on cars well into the year. I told them I’d be at their door every morning at 8AM and wanted the first Z off the transporter. I was a 21-year-old Infantry Captain Aviator with all my combat & flight pay for the year saved up. I was there when the first ever load of Z’s arrived in town. I got the first one off the truck, HLS30-1769. Safari Gold #920. I still drive it at least 5 days/wk. Never any major repairs. Just had a new clutch installed at 152K miles. Synchro still good. Drives straight. 3500-mile road trip last fall. Drove it pretty sporty. Had to tighten the fan belt once. 22mpg. Never painted. No rust. Dash not cracked. OE seats like new. Replaced carpets a few years back. OE Toshiba AM radio with working antenna. All gauges work. For a guy who got shot down twice in VN and lived to tell about it, I feel pretty lucky. Love my old car.

    Same thing here, didn’t know about PX’s in Nam. Got home , ordered my 69 Ram Air III triple black GTO convert.

Leave a Reply

Your email address will not be published. Required fields are marked *