1964 Shelby Cobra Daytona Coupe

1 of 8
Engine8-cyl. 289cid/345hp 4x2bbl
Body Style2 Door Coupe
Exterior ColorFord Guardsman blue
Interior ColorBlack

No. 1 on the National Historic Vehicle Register


The Shelby Cobra Daytona Coupe chassis number CSX2287 is nationally significant based on four criteria. First, it is associated with important American and international competition events including the Fédération Internationale de l’Automobile (FIA) International Manufacturers’ GT Championship series and land speed record runs at the Bonneville Salt Flats in Utah. Second, it is associated with important automotive designers, builders and drivers such as Carroll Shelby, Peter Brock, Ken Miles, Phil Remington and Phil Hill. Third, is the significance of its aerodynamic design, and the construction techniques that were used to build the car. Fourth, is its information value as a prototype racecar that retains much of its original materials, components and finishes. The period of significance for CSX2287 was from January 1964 to December 1965.

The Shelby Cobra Daytona Coupe CSX2287 was the prototype racing coupe version of the Shelby Cobra roadster produced by Shelby American, Inc. CSX2287 was built from October 1963 to January1964 to compete against Ferrari and other manufacturers in the FIA International Manufacturers’ GT Championship. CSX2287 was commissioned and built by Shelby American, Inc. based on the efforts of designer Peter Brock, racing director Ken Miles, fabricator John Ohlsen and chief engineer Phil Remington. The coupe was built on the same chassis, suspension, engine, transmission and other mechanical components used for the Cobra roadsters. Peter Brock’s aerodynamic body design with a truncated tail section enabled the car to achieve more than 180 miles per hour and compete successfully against Ferrari in the FIA championship. The construction of and assembly of CSX2287 took place in Los Angeles, California. The five subsequent Daytona Coupes based on CSX2287 were partially built in Italy.

CSX2287 was raced in eight events during the 1964 and 1965 FIA seasons. In 1964, Shelby American, Inc., achieved second place in the final standings of the FIA International Manufacturers’ GT Championship based on the strong race results with CSX2287 and the other new Cobra Daytona Coupes. In 1965, Shelby American, Inc. won the FIA International Manufacturers’ GT Championship based mainly on the success achieved with the Cobra Daytona Coupes. This victory was the first American automobile manufacturer victory in an FIA international championship series. In November 1965, CSX2287 was driven to a total of 23 national (United States Auto Club) and international (FIA) land speed records at the Bonneville Salt Flats in Utah. The car was sold by Shelby American, Inc. in 1966 to a private owner and was never raced competitively again.


Shelby American, Inc.

Venice, CA

Registration: 1E 013 for California Manufacturer

Shelby American used the vehicle as part of its racing team program in 1964 and 1965.


Fredrick A. Simeone, M.D.

Philadelphia, PA

Simeone Foundation Automotive Museum display and limited exhibition


Shelby American, Inc.

Venice, CA

Peter E. Brock, designer

Ken Miles, race team manager and engineer

Phil Remington, chief engineer

DATE(S) OF CONSTRUCTION: October 1963 – January 1964

Paint and exterior

CSX2287 is a two-door, front-mounted engine, rear-wheel drive, aluminum-bodied prototype competition car. It has a naturally aspirated Ford Motor Company 289 cubic inch displacement V-8 engine with four Weber 48 mm IDA carburetors. Its drivetrain consists of a four-speed Borg – Warner T10 manual transmission and a Salisbury 4HU differential. The chassis, manufactured in the United Kingdom by A.C. Cars Ltd., consists of a steel ladder tube type frame incorporating four- wheel independent suspension and four-wheel disc brakes. The exterior of the body is painted in Ford Guardsman Blue. The paint exhibits wear and deterioration believed to be circa 1966. The car was disassembled, repaired and partially restored in 2004 and still retains many of its materials, components and finishes from the 1960s.

Upholstery and interior

Black vinyl upholstery over low-back racing bucket seats. Wood-rim steering wheel. The interior is mostly unrestored and is sparsely appointed with aluminum panels painted black. Stewart Warner gauges in a crinkle finish dash.


Original Engine: Yes

Liquid-cooled, Ford OHV 289 cid V8/345hp 4x2bbl - 48mm IDA Webers - The engine is a stock 1965 GT350/Cobra Hi-Po 289 that was placed in by Shelby American Inc. when CSX2287's racing career came to an end.


Shelby American raced CSX2287 extensively from 1964-1965. After which it was driven on the street by a handful of owners. 50 years later, it is in running condition and on permanent display at the Simeone Museum. Its mileage is unknown.

Wheels and tires

5.50/9.75-15 front/ 7.00/12.80-15 rear


Four-wheel hyd. disc brakes


The Cobra has an aluminum Borg Warner T10 4-speed manual trans. Its case has the date code 3-30-64 and casting numbers T10L-1 W.G.DIV. The tailshaft housing is cast iron and has the casting numbers T10B-1 W.G. DIV. Hydraulic actuated clutch.

Valuation Tools

How much is this car worth?

See current values, model info and recent sales for this make and model. Drivers Club members get unlimited pricing history and data.